Because the MA18B is too large for my current setup, I need something smaller.
Therefore, I changed a MA16B to see if that will work better. (and like this setup, it just looks different it stands out from the rest)
Lets start cutting.
![](images/20210225_105746.jpg)
Almost there.
![](images/20210225_105924.jpg)
Float bowl separated.
![](images/20210225_110247-0-.jpg)
Time for using the mill.
![](images/20210225_110925.jpg)
Starting.
![](images/20210225_111242-0-.jpg)
Almost there.
![](images/20210225_111533.jpg)
Startpoint for the grinding.
![](images/20210225_111717.jpg)
Start large.
![](images/20210225_111815.jpg)
Roughly done.
![](images/20210225_112050.jpg)
Fine grinding
![](images/20210225_112135-0-.jpg)
Getting better.
![](images/20210225_112521-0-.jpg)
M5 angular
![](images/20210225_121210.jpg)
Nice and tight.
![](images/20210225_121726-0-.jpg)
Mounted.
![](images/20210225_132042.jpg)
Looking nice
![](images/20210225_140711.jpg)